Mehdi Aluminium, a reliable manufacturer and supplier based in Tunis, Tunisia, offers high-quality Aluminium 1070 Wires designed for excellent performance and consistency. Known for their exceptional purity and smooth surface finish, these wires are produced using advanced processing techniques and strict quality control. Aluminium 1070 Wires are widely appreciated for their superior conductivity, corrosion resistance, and ease of handling. With a strong focus on customer requirements and international standards, Mehdi Aluminium ensures dependable supply, uniform quality, and long-lasting aluminium wire solutions for a variety of industrial applications.
Aluminium 1070 Wires contain a minimum of 99.7% pure aluminium, offering outstanding electrical and thermal conductivity along with excellent corrosion resistance. The high purity results in very good ductility and flexibility, allowing the wires to be easily drawn, bent, and formed without cracking. Mechanically, Aluminium 1070 is soft with relatively low tensile strength, but it provides stable and reliable performance in applications where conductivity and formability are more critical than structural strength.
Standards : ASTM B221, B211
Temper : H14
Diameter : 5.5 – 400 mm
Length : 10 – 10000 mtr
Form : Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated Wire, Continuous Coils, Cut to lengths, Precision cutting Etc
Treatment : Cold Forming, Heat Treatment, Stress Relieving and Welding
| Aluminium 1070 | Fe | Si | Mg | Mn | Cu | Zn | Ti | Al |
| 0.25 | 0.2 | 0.03 | 0.03 | 0.03 | 0.07 | 0.03 | 99.70 |
| Mechanical Properties – Al 1070 | |||||||||||||||||||
| Properties | Conditions | ||||||||||||||||||
| T (°C) | Treatment | ||||||||||||||||||
| Density (×1000 kg/m3) | 7.7-8.03 | 25 | |||||||||||||||||
| Poisson’s Ratio | 0.27-0.30 | 25 | |||||||||||||||||
| Elastic Modulus (GPa) | 190-210 | 25 | |||||||||||||||||
| Tensile Strength (Mpa) | 640 | 25 | cold drawn, spheroidized annealed more | ||||||||||||||||
| Yield Strength (Mpa) | 495 | ||||||||||||||||||
| Elongation (%) | 10 | ||||||||||||||||||
| Reduction in Area (%) | 45 | ||||||||||||||||||
| Hardness (HB) | 192 | 25 | cold drawn, spheroidized annealed more | ||||||||||||||||
Mehdi Aluminium based in Tunis, Tunisia is a renowned manufacturer and supplier of premium aluminium products, including Aluminium Bars, Sheets and Plates, Coils, Chequered Plates, Wires, Pipes, Fittings, Flanges, Forging, Circle, Angles. With a commitment to delivering exceptional quality and service, we cater to diverse industries, offering reliable solutions tailored to specific requirements. Our products are known for their superior strength, corrosion resistance, and precise dimensions. We focus on customer satisfaction by providing an extensive range of aluminium bars designed for structural, industrial, and decorative applications.
Yes, we offer custom sizes for Aluminium 1070 Wire to meet specific project needs. Our team at Mehdi Aluminium is committed to providing customized solutions for all your requirements. For more details, contact us at sales@mehdialuminium.com
| STANDARD | UNS | WERKSTOFF NR. |
| Aluminium 1070 | A91070 | 3.0275 |
Aluminium 1070 Wires are widely used in electrical and power transmission applications due to their superior conductivity. Common uses include electrical conductors, overhead transmission lines, winding wires, and earthing systems. They are also applied in heat exchangers, chemical equipment, and reflective components where high purity and corrosion resistance are required. Additionally, these wires are suitable for general industrial fabrication and specialty applications that demand lightweight material, easy workability, and consistent electrical performance across various operating conditions.
Our team is ready to assist you. Contact us for any queries or personalized solutions.
Tunisia
Copyright 2024 Mehdi Aluminium. All rights reserved
